ViewSonic SC-T35 User Manual page 89

Using ViewSonic Device Manager
Managing All Your Clients
NOTE
• For information on the meanings of the Status icons, please refer to "3.4.7
Understanding Client Status Icons" on page 53.
Waking a Client Group through Your Local Network
To wake a client group through your local network, please do the following:
1. On Thin Clients tab, click Thin Clients to expand the Client Group tree.
2. Right-click on the desired client group to open a popup menu.
3. Click to select Wake On LAN.
4. The Wake On LAN window appears prompting for confirmation.
5. Click Now to confirm.
6. Each client in this group is powered up.
7. After completion, the Status icons will indicate clients of this group are on-line.
NOTE
• For information on the meanings of the Status icons, please refer to "3.4.7
Understanding Client Status Icons" on page 53.
84