Table of Contents
Advertisement
3.4.7
Understanding Client Status Icons
In the client list of a client group or a filter, a client status icon is placed in front of each client to indicate the current
state of the client.
NOTE
• With filters, you can access and manage a specific set of clients quickly on ViewSonic
Device Manager. For more information on filters, please refer to section "3.4.30
Digging Out Clients with Filters" on page 94.
The status icon changes according to different states of a client. Six types of icons are available:
Understanding Client Status Icons
State
Online
Offline
Reboot needed
Modified
Pushed
Unknown
NOTE
• The icon made up of a little display with a letter L, W, or Z on its screen indicates that
the client is a Linux-based, WES-based (Windows Embedded Standard) thin client.
• A tooltip pops up as shown below if you hover your mouse pointer over an icon.
Icon
Indicates that the client is turned on at the moment.
Indicates that the client is turned off at the moment.
Indicates that you need to reboot the client for a
configuration change to take effect.
Indicates that a client configuration change has been
made on ViewSonic Device Manager and you need to
push the change to the client.
Indicates that ViewSonic Device Manager has pushed a
configuration change to the client.
Indicates that the managed client is now added and
managed by another instance of ViewSonic Device
Manager.
53
Using ViewSonic Device Manager
Managing All Your Clients
Description
Advertisement
Table of Contents
