Table of Contents
Advertisement
4. In Firmware/Snapshot/WES Packages URL field, replace YourServerIP in the original URL with the IP address
of another computer where you want to get updates and snapshots, type in the default credentials — user
as the username and secret as the password, and then click Save to apply.
3.2.9
Selecting the Service IP of ViewSonic Device Manager
To select the service IP address of your ViewSonic Device Manager, please do the following:
1. On System tab, click System Settings > General Settings.
2. Click the drop-down list of available service IP addresses to select the desired IP address.
3. Click Save to apply.
NOTE
• It's strongly recommended to use a fixed IP address as the service IP of ViewSonic
Device Manager. The change of the service IP may make all the managed clients
become unmanageable. In case that the IP address of the computer where
ViewSonic Device Manager is installed is changed, ensure that you make the Service
IP setting here consistent with the new IP address.
Using ViewSonic Device Manager
Establishing a Basic Administration Environment
31
Advertisement
Table of Contents
