ViewSonic SC-T35 User Manual page 71

Using ViewSonic Device Manager
Managing All Your Clients
STEP 1: Apply a group configuration to the selected client
To apply a group configuration to a client, please do the following:
1. On Thin Clients tab, click Thin Clients to expand the Client Group tree, and then click the client group to
which the desired client belongs.
2. The Client list appears.
3. Click to select the desired client, and then click Edit.
4. The Thin Client Information pane appears in Management area.
5. Click the Profile drop-down menu to select the desired group configuration (profile), associating the selected
client with this configuration, and then click Save to apply.
NOTE
• The other way to associate a client with a group configuration (profile) is to add the
client to the applicable scope of the desired profile. For more information, refer to
section "3.4.11 Creating Client Setting Profiles" on page 58.
STEP 2: Apply an individual configuration to the client
To apply an individual configuration to the client next, please do the following:
NOTE
• To ensure that your ViewSonic Device Manager is in sync with the setting values on
managed clients, it's recommended to pull client settings from all managed clients
for ViewSonic Device Manager before editing individualized client settings. For
detailed instructions on how to pull client settings from managed clients, please
refer to section "3.4.16 Pulling Client Settings through Your Local Network" on page
71.
1. Click to select the desired client again, and then click Edit Configuration this time.
2. Edit the individual configuration for the selected client.
NOTE
• For more details, please refer to section "3.4.13 Using Individualized Client Settings"
on page 64.
66