Configuring The Access Privileges And Password Of Viewsonic Client Setup - ViewSonic SC-T47 User Manual

4.2.3

Configuring the Access Privileges and Password of ViewSonic Client Setup

You can configure the access privileges of ViewSonic Client Setup for client users by the Password setting.
Setting Access Privileges and Password Only for Administrators
To set access privileges and password only for administrators, please do the following:
NOTE
• System administrators (and only administrators) are allowed to access ViewSonic
Client Setup by default. If you don't enable user authentication for administrators
and don't set a password here, the system administrator privileges are sufficient to
access ViewSonic Client Setup. If authentication is enabled and the password is set,
administrators will need that password to enter ViewSonic Client Setup.
1. On ViewSonic Client Setup, click System > Password.
2. Under the Administrator section, click to check Active Admin Authorization.
3. The access privileges for administrators are granted and a window appears for you to set the password.
4. Type in the desired password, and then click Save to apply.
5. Click Save to store all the changes.
Configuring Client Settings
Configuring System Settings
31