Table of Contents
Advertisement
Using ViewSonic Device Manager
Managing All Your Clients
3.4.21 Shutting Down Clients through Your Local Network
Shutting Down a Client through Your Local Network
To shut down a client through your local network, please do the following:
1. On Thin Clients tab, click Thin Clients to expand the Client Group tree, and then click to select the client
group to which the desired client belongs.
2. The Client list appears.
3. Click to select the desired client, and then click Command to open the Command menu.
4. Click to select Shutdown.
NOTE
• To select more than one client, Ctrl-click to select the desired clients.
WARNING
• Ensure that no important tasks are performed on the selected clients.
5. On the selected client, a warning message appears to notify the user of the planned shutdown and allow the
user to cancel the action if necessary.
6. After completion, the Status icon will indicate the client is off-line.
80
Advertisement
Table of Contents
