Using ViewSonic Device Manager
Adding Clients into a Managed Group
3.3 Adding Clients into a Managed Group
3.3.1
Scan Tab Overview
Scan tab enables you to discover unmanaged clients over your local network, including clients that are not
managed by the current ViewSonic Device Manager instance. To access the functionality of Scan tab, click the tab
on ViewSonic Device Manager.
1
Interface Elements
No.
Name
1
Navigation Area
2
Management Area
3.3.2
Available Tasks at a Glance
No.
1
Discovering clients in the whole range of a local network
2
Discovering clients in a specified range of IP addresses
3
Discovering clients using predefined IP range lists
3.3.3
Client Detection and Management
Your client is not managed by any ViewSonic Device Manager by factory default. To manage your clients with
Scan Tab Overview
Description
Click to check the desired client detection method.
Manage IP Range lists or discovered clients.
Available Task
40
2
Section
Page
3.3.4
41
3.3.5
43
3.3.6
44
3.3.7
45