Table of Contents
Advertisement
Using ViewSonic Device Manager
Managing All Your Clients
7. Click OK to confirm.
8. The Pull Settings window appears showing the progress and result of retrieving settings.
9. After completion, click Close to exit.
Pull Settings for a Client Group
To pull settings for a client group, please do the following:
1. On Thin Clients tab, click Thin Clients to expand the Client Group list.
2. Right-click on the desired client group to open a popup menu, and then click to select Pull Settings.
3. The Pull Settings window appears showing the progress and result of retrieving settings.
NOTE
• Ensure that clients in the selected group are all powered up. Otherwise you may
fail to pull settings from some clients. You can remotely know the current status of
a client through the Status icon in front of the client. For information on the Status
icons, please refer to section "3.4.7 Understanding Client Status Icons" on page 53.
4. After completion, click Close to exit.
72
Advertisement
Table of Contents
