Table of Contents
Advertisement
Using ViewSonic Device Manager
Managing All Your Clients
3.4.11 Creating Client Setting Profiles
A setting profile (group configuration) is a set of client settings shared by a group of clients. Through a setting
profile, you can remotely configure client settings in groups.
NOTE
• To have a basic understanding of client configuration, please refer to section "3.4.8
Client Settings" on page 54.
A simple picture of how to create a well-defined setting profile can be given by two steps:
Step 1: Create a set of shared client settings (group configuration)
Step 2: Specify the applicable scope of the setting profile
STEP 1: Create a set of shared client settings
To create a client setting profile (group configuration), please do the following:
1. On Thin Clients tab, click Profiles to expand the Profile Group tree, and then click to select the profile group.
NOTE
• You need to select the profile group to which the new profile belongs first. You
can use the system default (Ungrouped), and change the group at a later time if
necessary. For detailed instructions on how to create a profile group, please refer to
section "3.4.9 Creating Setting Profile Groups" on page 56.
2. Click Add on the top of the Profile list.
3. The Add window appears prompting for the name, description, applicable platform, and models.
NOTE
• A field marked with an asterisk is the required field.
58
Advertisement
Table of Contents
