Table of Contents
Advertisement
Using ViewSonic Device Manager
Managing All Your Clients
3.4.13 Using Individualized Client Settings
An individual configuration is a set of client settings applied only to a single client.
NOTE
• To have a basic understanding of client configuration, please refer to section "3.4.8
Client Settings" on page 54.
• To ensure that your ViewSonic Device Manager is in sync with the setting values on
managed clients, it's recommended to pull client settings from all managed clients
for ViewSonic Device Manager before editing individualized client settings. For
detailed instructions on how to pull client settings from managed clients, please
refer to section "3.4.16 Pulling Client Settings through Your Local Network" on page
71.
To apply an individual configuration to a client, please do the following:
1. On Thin Clients tab, click Thin Clients to expand the Client Group tree, and then click to select the client
group to which the desired client belongs.
2. The Client list appears in Management area.
3. Click to select the desired client, and then click Edit Configuration.
4. The Edit Configuration window for the client appears.
5. Use this window to edit the individual configuration.
64
Advertisement
Table of Contents
