Configuring Client Settings
Configuring System Settings
3.2.3 Configuring the Access Privileges and Password of ViewSonic Client Setup
You can configure the access privileges of ViewSonic Client Setup for client users by the Password setting.
Setting Access Privileges and Password Only for Administrators
To set access privileges and password only for administrators, please do the following:
NOTE
• System administrators (and only administrators) are allowed to access
ViewSonic Client Setup by default. If you don't enable user authentication
for administrators and don't set a password here, the system administrator
privileges are sufficient to access ViewSonic Client Setup. If authentication is
enabled and the password is set, administrators will need that password to
enter ViewSonic Client Setup.
1. On ViewSonic Client Setup, click System > Password.
2. Under the Administrator section, click to check Active Admin Authorization.
3. The access privileges for administrators are granted and a window appears for you to set the
password.
4. Type in the desired password, and then click Save to apply.
5. Click Save to store all the changes.
18