3.1.2
Available Tasks at a Glance
The following table shows functionality provided in each tab. For more details, please refer to the corresponding
section as shown below:
Tab
• Creating accounts for administration
• Managing thin client firmware files
• Managing WES package files
• Managing client snapshots
• Managing certificates of remote computers
• Configuring remote deployment settings
System
• Configuring settings for ViewSonic Device
Manager
• Backing up the management database
• Managing database archive files
• Restoring management database
• Scheduling automatically performed tasks
• Looking for clients in the whole range
of a local network
• Looking for clients in a specified range
Scan
of IP addresses
• Looking for clients with predefined
IP range lists
• Creating group configuration for clients
• Using individualized configuration for clients
• Using hybrid configuration for clients
• Pushing settings to clients
• Pulling settings from clients
• Pushing certificates to clients
• Sending messages to clients
Thin Clients
• Rebooting clients remotely
• Shutting down clients remotely
• Waking clients remotely
• Monitoring the use of clients
• Controlling clients remotely
• Exporting client data
• Digging out profiles/clients with Quick Search
• Digging out clients with filters
• Viewing event logs
Logs
• Exporting event logs
• Emptying event logs
• Viewing information on ViewSonic Device
Manager
About
• Viewing ViewSonic contact information
• Viewing software license agreement
Function List
15
Using ViewSonic Device Manager
ViewSonic Device Manager
Section
3.2
Establishing a Basic Administration
Environment
3.3
Adding Clients into a Managed Group
3.4
Managing All Your Clients
3.5
Viewing and Managing Event Logs
3.6
Viewing Software Information
Page
16
40
47
98
102