ViewSonic SC-T35 User Manual page 122

Edit Configuration (Thin Client) Window: SC-T45
2. Click on the icon of the desired setting.
3. Click Add to add up an entry for that setting if necessary.
4. On the detailed setting page(s), choose or type in the desired setting values.
NOTE
• Click on the gray lock
gray lock will become orange
and secured, the corresponding setting value is locked on the client and cannot be
changed locally through ViewSonic Client Setup.
• If the lock icon of a setting value is blue
group configuration (profile). You can only change the value by modifying /
removing the group configuration (profile) or applying a new one.
• If you apply a group configuration to a client, all related settings will also be shown
in the Edit Configuration window for that client.
5. After the editing of setting values is completed, click Save at the bottom of that setting page to
save the changes.
6. Repeat steps 1 through 5 to edit other settings.
NOTE
• You need to push settings to that client for the changes to take effect.
Editing or Adjusting an Individual Configuration
icon located close to a setting item to lock its value. The
and secured. When a lock icon becomes orange
, this setting value comes from the
117
Configuring Client Settings