Table of Contents
Advertisement
Configuring Client Settings
Editing or Adjusting a Group Configuration
4.3 Editing or Adjusting a Group Configuration
On ViewSonic Device Manager, you can edit client settings for a group of clients through
the Edit Configuration window for a profile (group configuration). Through this window,
all remotely configurable settings can be edited, then you can push settings to the target
group of clients defined in that profile through the Push Settings feature.
NOTE
• In this section, we will focus on the editing or adjusting of a profile (group
configuration) in greater detail. For general instructions on how to create a profile
(group configuration) or on how to open the Edit Configuration window for profile,
please refer to section "3.4.12 Creating Client Setting Profiles" on page 66.
• To have a basic understanding of client configuration, please refer to section "3.4.9
Client Settings" on page 62.
• Please note that, although the Edit Configuration window for a profile (group
configuration) looks almost the same as the Edit Configuration window for a client
(individual configuration), their functions are different. The latter will only affect
some specific client when the configuration is applied. For information on the
editing or adjusting of an individual configuration for a client, please refer to section
"4.4 Editing or Adjusting an Individual Configuration" on page 116.
To configure a setting in the Edit Configuration window (for a group configuration), please
do the following:
1. In the Edit Configuration window for a profile, click the tab to which the desired setting belongs.
Edit Configuration (Profile) Window: SC-T35
114
Advertisement
Table of Contents
