Using ViewSonic Device Manager
Adding Clients into a Managed Group
4. Select the desired client(s), the preferred client group from the drop-down menu on the top of the Client list,
and then click Put in group.
NOTE
• The default client group is Ungrouped. You can change the group of a client at a
later time. To create new client groups, please refer to section "3.4.3 Creating Client
Groups" on page 49.
• To select multiple clients, just click to select each individual client. You can also use
Select All and Unselect All on the top of the Client list to select/unselect clients.
5. On completion, the client(s) is managed by your ViewSonic Device Manager.
NOTE
• Whichever group you add a client to (including Ungrouped), once Put in group
is executed successfully, the client will be managed by your ViewSonic Device
Manager.
42