Table of Contents
Advertisement
6. The Update Firmware window appears prompting you to select the firmware version and system language.
7. Click drop-down menus to select the desired firmware version and system language, and then click OK to
confirm.
8. On the selected client, a warning message appears to notify the user of the planned reboot and allow the
user to cancel the action if necessary.
9. After completion, the client is updated with the desired firmware and system language.
3.4.24 Installing Software Packages
To install a software package for your client, please do the following:
NOTE
• Installing additional software packages is allowed only for WES-based (Windows
Embedded Standard) clients.
1. On Thin Clients tab, click Thin Clients to expand the Client Group tree, and then click the client group to
which the desired client belongs.
2. The Client list appears.
3. Click to select the desired client, and then click Command on the top of the Client list.
NOTE
• To select more than one client, Ctrl-click to select the desired clients.
WARNING
• Ensure that no important tasks are performed on the selected clients.
Using ViewSonic Device Manager
87
Managing All Your Clients
Advertisement
Table of Contents
