Table of Contents
Advertisement
4. Type in the desired name, description, choose the applicable platform and models, and then
click Save to confirm.
5. The Edit Configuration window for the profile (group configuration) appears.
6. Use this window to edit client settings of this profile.
NOTE
• The Edit Configuration window for the profile (group configuration) is just like a
remote version of ViewSonic Client Setup on a client. You can simply edit client
settings for this setting profile through this window. For detailed instructions on
how to configure client settings, please refer to "Configuring Client Settings" on
page 113.
7. After completion, close the window.
8. The newly created setting profile is added to the Profile list.
STEP 2: Specify the applicable scope of the setting profile
To specify the applicable scope of the setting profile, please do the following:
1. Click to select the newly created profile, and then click Edit on the top of the Profile list to specify the
applicable scope of the profile.
2. Both the Profile Information and Available Clients panes appear in Management area.
3. Click
at the right top of the Available Clients pane.
Using ViewSonic Device Manager
59
Managing All Your Clients
Advertisement
Table of Contents
