Table of Contents
Advertisement
Using ViewSonic Device Manager
Managing All Your Clients
Pushing Settings to All Client Groups
To push settings to all client groups, please do the following:
NOTE
• To ensure that your ViewSonic Device Manager is in sync with the setting values on
managed clients, it's recommended to pull client settings from all managed clients
for ViewSonic Device Manager before editing individualized client settings. For
detailed instructions on how to pull client settings from managed clients, please
refer to section "3.4.16 Pulling Client Settings through Your Local Network" on page
71.
1. On Thin Clients tab, right-click on Thin Clients in Navigation area to open a popup menu.
2. Click to select Push Settings.
3. The Push Settings window appears showing the progress and result of pushing settings.
NOTE
• Ensure that all clients are powered up. Otherwise, you may fail to push settings
to some clients. You can remotely know the current status of a client through the
Status icon in front of the client. For information on the Status icons, please refer to
section "3.4.7 Understanding Client Status Icons" on page 53.
4. After completion, click Close to exit.
5. Check the status of clients through the Status icon in front of clients. If needed, restart clients to complete the
configuration changes on clients.
70
Advertisement
Table of Contents
