Load Cell Replacement - ISHIDA BC-4000 Service Manual

Chapter 4 COMPONENT REPLACEMENT
4.3

LOAD CELL REPLACEMENT

1. Remove the weigh platter.
3. Remove the 3 screws located on the bottom
of the machine that are fixing the top cover.
Screws
5. Detach the top cover, and remove the
communication cable connecting with the
keyboard.
Keyboard communication cable
4-4
2. Dismount the front cover of the printer unit by
removing the 2 fixing screws.
Screws
4. Remove the screw fixing the top cover of the
printer unit.
6. Remove the 2 screws fixing the weigh platter.
Screws
BC-4000 Service Manual No. 085-6693-02
Front cover
Screw