ISHIDA BC-4000 Service Manual page 23

Chapter 2 SETUP MODE
2.2.2.1 B01-02-01 Label Format Copy
Operation
1. Press the [ENTER] key to enter B01-02-01 menu.
2. Key in the desired label format number (copy destination) and press the [PLU] key.
Example: Label format number "50"
3. Key in the desired label format number (copy origin) and press the [COPY] key.
Example: Label format number "2"
Note: Format #1 thorugh #4 are standard label formats and cannot be changed.
For format # 31 thorugh #99, edit the format after copying a standard format.
2.2.2.2 B01-02-02 Print Position Data
Printing position can be set for each unit.
Operation
1. Press the [ ] key to enter B01-02-02 menu.
2. Press the [ENTER] key to proceed to the next step.
3. Select "1" (Y axis) or "0" (X axis) using the [ ] or [ ] key.
or
2-8
FORMAT No. + [PLU]
b01-02-01 FORMAT No
FORMAT No. + [PLU]
b01-02-01 FORMAT No
FORMAT No. + [PLU]
b01-02-01 FORMAT No
UNIT
b01-02-02 UNIT
0:X AXIS POSITION
b01-02-02 0n00
0: X axis
1: Y axis
Unit number (1-22)
0:Y AXIS POSITION
b01-02-02 1n00
[ENTER]
(0552)
(in 0.1mm units)
(0490)
BC-4000 Service Manual No. 085-6693-02
(30)
30
(50)
50
(02)
02
0
Print position
0