ISHIDA BC-4000 Service Manual page 20

2.2.1.8 B01-01-08 Peel Sensor Selection
Operation
1. Press the [ ] or [ENTER] key to enter B01-01-08 menu.
or
2. Use the [ ] or [ ] key to confirm the meaning of each item (code).
or
3. Key in the desired number (0 or 1) to determine whether or not to use the peel sensor and press the
[ENTER] key.
0: Disable
1: Enable
or
2.2.1.9 B01-01-09 PLU Number Setting for Test Printing
Operation
1. Press the [ ] or [ENTER] key to enter B01-01-09 menu.
or
2. Key in the desired PLU number for test printing and press the [ENTER] key.
2.2.1.10 B01-01-10 Thermal Head Check Selection
Operation
1. Press the [ ] or [ENTER] key to enter B01-01-10 menu.
or
2. Use the [ ] or [ ] key to confirm the meaning of each item (code).
or
BC-4000 Service Manual No. 085-6693-02
PEEL SENSOR
b01-01-08 PEEL
TEST ITEM No.
b01-01-09 ITEM
HEAD CHECK
b01-01-10 HEAD CHECK
Chapter 2 SETUP MODE
1:ENABLE
1
00000001
1:ENABLE
1
2-5