Chapter 4 COMPONENT REPLACEMENT
4.7
POWER SUPPLY BOARD REPLACEMENT
1. Remove the weigh platter.
3. Remove the 3 screws located on the bottom
of the machine that are fixing the top cover.
Screws
5. Detach the top cover, and remove the
communication cable with the keyboard.
Keyboard communication cable
4-12
2. Dismount the front cover of the printer unit by
removing the 2 fixing screws.
Screws
4. Remove the screw fixing the top cover of the
printer unit.
6. Pull out the 2 plugs on the power supply
board.
BC-4000 Service Manual No. 085-6693-02
Front cover
Screw