Set Label Cassette For Default Label Format; Load File From Flash Drive; Save File To Flash Drive - ISHIDA Uni-3 Technical Manual

1.3.8

Set Label Cassette for Default Label Format

Use the following steps to set label cassette for the default label format.
1. Remove Speed Key insert page.
2. Enter then press
6000
3. Enter the password 495344 then press
4. Press then press the
11
5. Press then press the
4
6. Enter the desired default label format number. Press
7. Press then press the
8
8. Enter for Manual or
0
9. Enter for Die Cut or
0
10. Enter then press the
17
11. Enter for Fixed or
0
12. Enter for Fixed or
0
13. Enter for Fixed or
0
14. Enter for Fixed or
0
Note
When using continuous labels, settings B11-17 through B11-20 should be set to 1 for Variable.
15. Press three times Setup Mode.
Mode
and labeling.
1.3.9

Load File from Flash Drive

Note
USB specfications: 8 GB or smaller, FAT32 format, USB 3.0
Use the following steps to load files from a flash drive.
1. Remove Speed Key insert page.
2. Insert a flash drive containing a DATA0x Folder.
3. Enter then press
6000
4. Enter the password 495344 then press
5. Enter then press the
27
6. Press twice.
Enter
7. Press .
PLU B27-100 SEL USB FOLDER
8. Press the
Down Arrow
9. Press to select file.
PLU
10. Press the
Down Arrow
11. Press for Auto or press
1
will display.
12. Press .
Enter B27-01-04 EXECUTE
13. Press .
Zero 14011-0000 INPUT CHEECK
14. Press to begin loading files.
Enter
15. Press then press
Enter
16. Remove the flash drive. Scale is ready to resume weighing and labeling.
. will display.
Mode B00 SETUP
to enter service level.
PLU
, then press
Down Arrow
.
Down Arrow B11-04 FMT No.
.
Down Arrow B11-08 PRN MODE
for Auto. Press
1 Enter
for Continuous. Press
1
.
Down Arrow B11-17 PLU NAME
for Variable. Press
1 Enter
for Variable. Press
1 Enter
for Variable. Press
1 Enter
for Variable. Press
1 Enter. B11-20 XTRAMSG3
KEY IN ITEM No.
. will display.
Mode B00 SETUP
to enter service level.
PLU
Down Arrow. B27 FILE SAVE/LOAD
will display.
B21-01-01 I/P SELECT
will display. This may take up to 30 seconds as files are scanned.
to locate file to be loaded.
B27-01 USB-TO-SCALE
twice.
B27-01-03 MASTER MODE
for Manual load. Press
2
will display.
will display.
14013-0000 COMPLETE INPUT
three times to exit Setup Mode.
Mode
B00 SETUP
.
Enter B11-01 CASSETTE No.
will display.
.
Enter B11-04 FMT No. with number
will display.
twice. will display.
B11-09 LBL TYPE
.
Enter
will display.
twice.
B11-18 XTRAMSG1
twice.
B11-19 XTRAMSG2
twice.
B11-20 XTRAMSG3
will display.
will display. The scale is ready to resume weighing
B00 SETUP
will display.
B27-10x and File Name
will display.
will display.
.
Enter B27-01-03 MASTER MODE with selected load choice
will display when complete.
KEY IN ITEM No.
will display.
will display.
will display.
will display.
will display.
will display.
will display.
will display.
will display.
Introduction 9