3. TEST MODE (C Mode)
3.1
ENTERING TEST MODE
When the power is turned ON,
Press the [RESET] key to reset the machine,
Keep pressing any key other than the [RESET] key for a while until C00 menu appears on the display.
When the power is turned OFF,
Turn ON the power, and immediately press and keep pressing any key other than the [RESET] key for
a while until C00 menu appears on the display.
Note: It will take approximately 30 seconds to enter test mode.
BC-4000 Service Manual No. 085-6693-02
KEY IN ITEM No.
0.000
0.000
TEST MODE PRESS [ ] KEY
C00
TEST MODE PRESS [ ] KEY
C00
Chapter 3 TEST MODE
0.00
0.00
3-1