ISHIDA BC-4000 Service Manual page 26

3. Key in the desired number of units and press the [ENTER] key.
2.2.2.8 Returning to B01-02-01
Operation
Press the [END] key to return to B01-02-01 menu.
2.2.2.9 B01-02-06 Length + Gap
Operation
1. Press the [ ] key repeatedly until 01-02-06 menu appears, or key in "6" and press the [ ] key to
enter 01-02-06 menu directly.
2. Key in the desired data (Length + Gap) in 0.1mm units and press the [ENTER] key.
2.2.2.10 Returning to B01-01
Press the [END] key to return to B01-01.
2.2.2.11 Returning to B01
Operation
Press the [END] key again to return to B01.
BC-4000 Service Manual No. 085-6693-02
FORMAT No. + [PLU]
b01-02-01 FORMAT No
LENGTH + GAP (32.5 to 242.5)
b01-02-06 LENGTH
PRINT SETUP
b01-01 PRINT
1 LABEL FORMAT
b01 LABEL FORMAT
Chapter 2 SETUP MODE
(30)
30
0.0
[ENTER]
1
[ENTER]
2-11