C01-04 Rs232C Check; C01-05 Application Program Number - ISHIDA BC-4000 Service Manual

3. Press the [END] key to finish the display check.
The screen will return to C01-01 menu.
3.2.4

C01-04 RS232C Check

A loop back test can be performed to carry out the RS232C input test. Engage the TXD and RXD
short-circuited connector with D-SUB 9.
Operation
1. Press the [ ] key repeatedly until C01-04 menu appears.
2. Press the [ENTER] key to enter C01-04-00 menu.
3. Press the [PRINT] key to output test data and judge by verifying received test data and sent data.
When the data matches, "PASS" is displayed and "OK" buzzer sounds.
4. To finish the check, press the [END] key. The screen will return to C01-01 menu.
3.2.5

C01-05 Application Program Number

Operation
Press the [ ] key repeatedly until C01-05 menu appears.
BC-4000 Service Manual No. 085-6693-02
1. A/D CHECK
C01-01
4. RS232C CHECK
C01-04
RS232C CHECK
C01-04-00
RS232C CHECK
C01-04-00
1. A/D CHECK
C01-01
5. APLY PROG. No.
C01-05
Chapter 3 TEST MODE
[ENTER]
[ENTER]
[PRINT]
[END]
PASS
[ENTER]
[ENTER]
3-5