Download  Print this page

Figure 6-7 Alarm Input: Record Video Clip Options - Honeywell HDZ20HD User Manual

Hdz series ip ptz dome.
Hide thumbs

Advertisement

Whichever option you select, you can also select how frequent the images should be
uploaded to the FTP/E-Mail server in the Image frequence [number] fps drop-down list.
Select an fps (frames per second) value from 1 to 15 fps, or select Max fps (default
setting).
Note
After making changes to your settings, it is advised to click Save and save your
settings. This can be done at any time, or multiple times during setup.
Recording Video Clip to a Configured Storage Device
Note
A microSDHC card must be connected to the back panel of the camera to be
able to record a video clip to the SD card. See
page 29
for the location to install the microSDHC card.
A Network attached storage device (NAS) must be connected and
configured to be able to record a video clip to the network storage. See
Network Attached Storage Management on page 131
information.
1.
Under Triggered action, select the Record video clip check box. The record video clip
options will appear below the check box (see
Figure 6-7
Alarm Input: Record Video Clip Options
2.
Select the storage device to record the clip to with the Record to drop-down list. Options
are SD card (default) or NAS. Whichever storage device is selected, that storage device
needs to be configured and connected before video clips can be recorded (see
Settings on page 129
3.
In the Pre-trigger buffer field, enter the number of seconds of video to record before the
trigger occurs (from 1 to 9999).
4.
To continue to upload images for a specified period of time or until the alarm ends, choose
the option that fits your requirements from the following selections:
Upload for [number] sec and enter a time from 1 to 9999 seconds.
Upload during trigger active.
Note
After making changes to your settings, it is advised to click Save and save your
settings. This can be done at any time, or multiple times during setup.
Figure
for more information).
Configuring Alarms | 93
Figure 2-5
and
Table 2-3
for more
6-7).
800-11873V4 - A - 07/2014
on
Storage

Advertisement

Chapters

   Also See for Honeywell HDZ20HD

   Related Manuals for Honeywell HDZ20HD

Comments to this Manuals

Symbols: 0
Latest comments: