Inverse; Auto Calibration; Figure 5-14 Camera Misc. Options, Part 2 - Honeywell HDZ20HD User Manual

HDZ20HD(X) and HDZ20HDE(X)
camera Misc options

Inverse

The Inverse option will reflect the image on a horizontal and vertical axis when enabled (this is
similar but not exactly the same as the 180 degree image rotate option; see
Rotate Type on page 47
1.
2.
3.

Auto Calibration

When the auto calibration function is enabled, the image is calibrated automatically whenever a
deviation in the camera pivot is detected.
Figure 5-14 Camera Misc. Options, Part 2
for more information).
Note This feature is only supported by the HDZ PTZ models: HDZ30(X) and
HDZ36E(X).

Navigate to PTZ Camera.
Under Misc (see Figure 5-14), in the Inverse drop-down list, select one of the following:
• On to enable image inversing.
• Off (default) to disable image inversing.
Click Set to save the setting.
Configuring PTZ Settings | 83
HDZ30(X) and HDZ36E(X) camera Misc
options, showing different options
Setting the Video
800-11873V4 - A - 07/2014