94 | HDZ Series IP PTZ User Manual
Assigning a PTZ Camera Function to Perform after Alarm Trigger
Sending an HTTP Notification to a Configured HTTP Server
Setting a File Name
You can specify a file name format for images uploaded when the alarm is triggered. Choose
the format that best meets your requirements.
Under Triggered action, select the PTZ Function check box. The PTZ Function options
will appear below the check box (see
PTZ Function Options
Select the PTZ function to perform on this alarm from the drop-down list: Preset, Preset
Tour, Autopan, Mimic Tour. See
information on programming these PTZ functions.
Enter a value in the Function line field to identify the specific function to perform (for
6-8, Preset 2 is selected).
If applicable (only available if Preset is selected), enter a value in the Dwell time field.
Under Triggered action, select the Send HTTP notification check box. The Send HTTP
notification options will appear below the check box (see
Send HTTP Notification Options
In the HTTP address drop-down list, select either HTTP1 or HTTP2.
In the Custom parameters field, enter the parameters to send to the HTTP server when
the alarm is triggered.
For example, if the HTTP server name is http://192.168.0.1/admin.php and the custom
parameter is action=1&group=2, the notification will be sent to the HTTP server as
http://192.168.0.1/admin.php?action=1&group=2 when the alarm is triggered.
After making changes to your settings, it is advised to click Save and save your
settings. This can be done at any time, or multiple times during setup.
In the File Name field (see
Configuring PTZ Settings on page 57
6-5), type a file name (image.jpg is the default file