Download  Print this page

Camera Settings - Honeywell HDZ20HD User Manual

Hdz series ip ptz dome.
Hide thumbs

Advertisement

Editing a Privacy Mask Position
1.
2.
3.
4.
5.
6.
7.
Deleting a Privacy Mask
1.
2.

Camera Settings

This section describes how to set various camera parameters, such as exposure mode, white
balance options, backlight compensation, image flip, auto calibration, speed by zoom, ICR
function, wide dynamic range, and digital noise reduction.
Navigate to PTZ
Privacy Mask (see
Under Mask Setting, in the Mask field, type a number for the privacy mask you are editing
(from 1 to 16). Click Edit to begin editing the selected mask.
If needed, you can change the Transparency, Color, Hsize and Vsize values to edit the
privacy mask. If you edit one or more of these values, be sure to click the appropriate Set
or Add button to save the changes (see
information).
To change the privacy mask position, click Edit at the bottom of the Mask Setting section.
The PTZ camera will pan/tilt to the privacy mask position that you have previously set.
Use the privacy mask position controls (see
privacy mask. Click one of either the left, right, up or down arrows to move the camera and
the privacy mask in that direction.
You can change the amount that the camera pans/tilts upon each click of an arrow by
typing a different value in the PT Steps field. Enter a value between 1 (short distance
pan/tilt) and 30 (long distance pan/tilt).
When the privacy mask is positioned and setup as required, click Edit at the bottom of the
Mask Setting section.
Note
Up to a 10 second delay may occur between completion of editing a privacy
mask position and the Edit button becoming available.
Navigate to PTZ
Privacy Mask (see
Under Mask Clearing, in the Mask drop-down list, select the number of the privacy mask
that you want to delete, and then click Clear.
Note
If you are clearing all privacy masks, it is recommended that you also disable the
privacy mask feature (see
Configuring PTZ Settings | 73
Figure
5-10).
Creating a Privacy Mask on page 71
Figure
5-10) to re-position the camera and
Figure
5-10).
step 2
in
Creating a Privacy Mask, page
for more
71).
800-11873V4 - A - 07/2014

Advertisement

Chapters

   Also See for Honeywell HDZ20HD

   Related Manuals for Honeywell HDZ20HD

Comments to this Manuals

Symbols: 0
Latest comments: