Download  Print this page

Configuring System Settings; System Settings; Setting A Host Name; Selecting The Camera Time Zone - Honeywell HDZ20HD User Manual

Hdz series ip ptz dome.
Hide thumbs

Advertisement

Configuring System Settings

This chapter includes:

System Settings

The System screen is open by default when the System tab is selected. Here you can give the
HDZ Series IP PTZ camera a new host name and configure the camera's time-related settings.
See
section of the System screen.

Setting a Host Name

By default, the HDZ Series IP PTZ dome camera is named with the model number of the camera.
If needed, the Administrator can rename the camera for their system:
1.
2.

Selecting the Camera Time Zone

1.
System Settings, page 107
Network Settings, page 118
Recording Settings, page 126
Storage Settings, page 129
Maintenance Settings, page 134
Note
The System tab can only be accessed by the Administrator.
Viewing the System Parameters on page 138
Navigate to the System tab
Type a new name for the camera in the Host Name field. The host name can be up to 30
characters in length. Any of the following characters may be used: A–Z, a–z, 0–9,
!@#$%^'&-_~. Click Save when finished.
Navigate to the System tab
Security Settings, page 109
DDNS Settings, page 125
Schedule Settings, page 128
File Location Settings, page 133
Support Settings, page 138
for more information on the Parameters List
System (see
Figure
7-1).
System (see
Figure
7-1).
7
7
800-11873V4 - A - 07/2014

Advertisement

Chapters

   Also See for Honeywell HDZ20HD

   Related Manuals for Honeywell HDZ20HD

Comments to this Manuals

Symbols: 0
Latest comments: