Figure 7-10 Snmp Network Settings Screen - Honeywell HDZ20HD User Manual

122 | HDZ Series IP PTZ User Manual
Enabling SNMP (Version 1 or 2)
1.
2.
3.
4.
5.
Enabling SNMP (Version 3)
1.
2.
www.honeywell.com/security
Figure 7-10 SNMP Network Settings Screen

Navigate to System Network
Choose one of the following:
• To use SNMP version 1, select the Enable SNMP v1 check box.
• To use SNMP version 2, select the Enable SNMP v2 check box.
In the Read Community field, specify the community name (password) for read-only
access to all supported SNMP objects. The default value is <public>.
In the Write Community field, specify the community name (password) for read/write
access to all supported SNMP objects (except read-only objects). The default value is
<private>.
Click Save.

Navigate to System Network
Select the Enable SNMP v3 check box.

SNMP (see Figure 7-10).

SNMP (see Figure 7-10).