Download  Print this page

Setting The Motion Detection Window; Figure 6-10 Current Motion As Detected Window - Honeywell HDZ20HD User Manual

Hdz series ip ptz dome.
Hide thumbs


96 | HDZ Series IP PTZ User Manual

Setting the Motion Detection Window

A motion detection "window" or frame appears in the Live View screen to specify the area to
detect motion within (see
can move and resize the window to be wherever you want in the Live View screen.
Adding a Motion Detection Window
Click add to add a new motion detection window to the Live View screen (see
can add up to 10 windows. The active window has a red border.
Deleting a Motion Detection Window
In the Live View screen, select the window that you want to delete (to make it the active window,
it will have a red border when active), and then click delete (see
Figure 6-10
Current Motion as Detected Window
Navigate to System
Select a motion detection profile to configure (see
Configure on page
Under Motion Detection, select one of the following options:
On to enable the motion detection profile.
Off to disable the motion detection profile (default setting).
By schedule to enable the motion detection profile based on a defined schedule
(refer to
Schedule Settings on page 128
If you select By schedule, you will also need to select the schedule(s) to be used
for this selection. Click on the Please select field and select the check box for
each schedule to be used.
Click Save.
The red line indicates the threshold
level of the motion sensitivity, as it
is currently set.
The blue line indicates the level of
motion that is currently being
detected by the camera.
Motion detection (see
Selecting a Motion Detection Profile to
for information on setting up a schedule).
6-11). You can add up to 10 motion detection windows. You
6-11). You



   Also See for Honeywell HDZ20HD

   Related Manuals for Honeywell HDZ20HD

Comments to this Manuals

Symbols: 0
Latest comments: