Download  Print this page

Using Safety Cable During Installation; Figure 2-1 Eyelet On Camera To Secure By Lanyard During Setup; Table 2-2 Honeywell Mounts And Adapters - Honeywell HDZ20HD User Manual

Hdz series ip ptz dome.
Hide thumbs

Advertisement

Model No.
HDCM1
HDXWM2
HDPRM2
HDZINBKT
HDXCMA1
HDXPMA1
For additional information, see

Using Safety Cable During Installation

The HDZ Series IP PTZ camera includes an eyelet for attaching a safety cable to securely fix the
camera to the mounting structure (see
cable (such as a 3/32-in. [2.4 mm] plastic coated aircraft cable) to secure the camera to the
building structure. This will prevent the camera from falling during installation. The cable must
be strong enough to support the weight of the camera (indoor model: 4.9 lb. [2.2 kg], outdoor
model: 5.7 lb. [2.6 kg]).
Eyelet location on Indoor dome back panel
Table 2-2
Honeywell Mounts and Adapters
Description
Ceiling Mount
Wall Mount
Parapet/Flat Roof Mount
In-Ceiling mounting bracket for the HDZ series.
Corner Mount Adapter for HDXWM2
Pole Mount Adapter for HDXWM2
Note
An In-ceiling mounting bracket (HDZINBKT) is available. Check with your
Honeywell supplier regarding In-ceiling mounting. See
Bracket
Installation, for in-ceiling bracket mounting instructions.
Figure 2-1
Eyelet on Camera to Secure by Lanyard During Setup
Related Documents on page
Figure
2-1). It is recommended that you install a safety
Eyelet location on Outdoor dome back panel
Installing the Camera | 25
Indoor
Outdoor
X
X
X
X
X
X
Appendix B, In-Ceiling
18.
800-11873V4 - A - 07/2014
X
X
X
X

Advertisement

Chapters

   Also See for Honeywell HDZ20HD

   Related Manuals for Honeywell HDZ20HD

Comments to this Manuals

Symbols: 0
Latest comments: