Download  Print this page

Network Security Settings: Ieee 802.1x; Figure 7-5 Create Certificate Request Window - Honeywell HDZ20HD User Manual

Hdz series ip ptz dome.
Hide thumbs

Advertisement

Creating a Request for a CA-Issued Certificate
1.
2.
3.
4.
5.
Installing a CA-Issued Certificate
1.
2.
3.

Network Security Settings: IEEE 802.1X

IEEE 802.1X is an IEEE standard for port-based Network Access Control. When IEEE 802.1X is
enabled, the camera can access network ports protected by 802.1X/EAPOL (Extensible
Authentication Protocol over LAN).
Navigate to System
Security
Under Install signed certificate, click Create Certificate Request.
Enter the required information in the Create Certificate Request fields (see
and then click OK.
Figure 7-5
Create Certificate Request Window
A certificate request is created. The request appears under Created Request (see
Figure
7-3).
Click Properties in the Created Request area.
Copy the PEM-formatted request and send to a CA for signing.
After the signed certificate is returned, you can install it.
Navigate to System
Security
Click Browse in the Upload signed certificate area. Locate and select the certificate on
your hard drive, and then click Open.
Click Upload.
Configuring System Settings | 115
HTTPS (see
Figure
7-3).
HTTPS (see
Figure
7-3).
Figure
7-5),
800-11873V4 - A - 07/2014

Advertisement

Chapters

   Also See for Honeywell HDZ20HD

   Related Manuals for Honeywell HDZ20HD

Comments to this Manuals

Symbols: 0
Latest comments: