Setting Up An Ip Filter; Figure 7-6 Ieee 802.1X Settings Screen - Honeywell HDZ20HD User Manual

116 | HDZ Series IP PTZ User Manual
Enabling IEEE 802.1X
1.
2.
3.
4.
5.

Setting Up an IP Filter

You can allow or deny specific IP addresses access to the camera. When the IP filter is enabled,
the IP addresses in the list will be allowed or denied access to the camera based on the filter
setting. To enable the IP filter:
1.
www.honeywell.com/security
Figure 7-6 IEEE 802.1X Settings Screen

Navigate to System Security
Contact your network administrator to obtain the following items:
• CA certificate: Required to authenticate the server
• Client certificate: Required to authenticate the IP camera
• Private key: Required to authenticate the IP camera
Upload the CA certificate, client certificate, and private key. Click Browse to locate the
certificate or key, then click Upload.
Under Settings, in the Identity field, type the user identity associated with the client
certificate. In the Private key password field, enter the password for the user identity.
Select the Enable IEEE 802.1X check box and click Save.

Navigate to System Security

IEEE 802.1X (see Figure

IP Filter (see Figure 7-7).
7-6).