Programming A Preset Point; Figure 5-1 Ptz Preset Programming - Honeywell HDZ20HD User Manual

58 | HDZ Series IP PTZ User Manual

Programming a Preset Point

1.
2.
3.
4.
5.
6.
www.honeywell.com/security
Figure 5-1 PTZ Preset Programming

Navigate to PTZ Preset (see
In the Live View screen, click and drag the pointer to the desired preset position. To
re-position the camera, place the mouse cursor over the video image and left-click and
drag in the direction you want to move the camera. The red arrow icon (
the direction that the image will pan/tilt.
Adjust the zoom and focus using the Wide, Tele, Auto, Manual, Near, and Far buttons.
Under Preset setting, in the Num drop-down list, select a number from the drop-down list
for the current preset.
The first drop-down list contains preset numbers 1 through 10. The next list contains
numbers 11 through 20, and so on, up to 256. Click NextPage to go to the next list of
preset numbers. Click PrePage to return to the previous list of numbers.
In the Name field, type a descriptive name for the current preset. The preset name can not
contain any spaces.
Click Set to save the settings for the preset that you have programmed.
Note You can also program a preset on the home page of the PTZ web client interface
(see Figure 3-6 on
and zoom and focus controls to position the camera at the desired preset
position. Enter a preset number in the Preset Details field and click Set.
Figure 5-1).
page 41). Use the PTZ controls (see
) indicates
Figure 3-7 on page 43)