Main Tabs; Quick Action Buttons; Table 3-2 Camera Interface Main Tabs; Table 3-3 User Interface Quick Action Buttons - Honeywell HDZ20HD User Manual

42 | HDZ Series IP PTZ User Manual

Main Tabs

Tab Description
Home The tab you see upon logging in. Use this tab to view live video, use the PTZ controls to pan,
tilt or zoom the camera, perform tours, go to preset positions and use other controls
included on the page. See
information on the actions that can be performed on this tab.
System Use this tab to configure the system, security, users, storage, network and other options
available with the camera. See
information on these configuration options.
Streaming Use this tab to configure the video and audio streaming options available with the camera.
Use these settings to adjust the video quality and bandwidth used by the camera. See
Configuring Video and Audio Streaming on page 45
PTZ Use this tab to setup preset points, program PTZ tours, assign privacy masks, and configure
other PTZ-related settings. See
on the available PTZ settings. Camera settings, such as White Balance and Exposure can
also be setup on this tab (see
Logout Click to logout of the current session.

Quick Action Buttons

Button Description
Click this button to view the video image in full screen mode. Once in full screen mode,
double-click or right-click then select Normal View to return to this view.
The Talk function allows for the local site to talk to the remote site. Click this button to toggle
the Talk feature on and off. This function is only available to users that have been granted
talk privileges by the administrator. The Audio function must be enabled on the Streaming

The Listen function allows for the local site to hear audio at the remote site. Click this button
to mute/enable the remote site audio. This function is only available to users that have been
granted listen privileges by the administrator. The Audio function must be enabled on the
Streaming
Click this button to capture a still image of the currently displayed video. The image will be
saved in JPEG format to the local hard drive. The default storage location for still images is
C:\. See
Note
Click this button to start recording a video clip of the currently displayed video. Click the
button again to stop recording the clip. The image will be saved in AVI format to the local
hard drive. The default storage location for video clips is C:\. See
page 133
Note
www.honeywell.com/security
Table 3-2 Camera Interface Main Tabs
Understanding the Web Client User Interface on page 40
Table 3-3 User Interface Quick Action Buttons
Audio tab to use this feature (see

Audio tab to use this feature (see
File Location Settings, page
Users with a Windows 7 operating system are required to be logged in as an
Administrator to use this function.
for more information on changing the location.
Users with a Windows 7 operating system are required to be logged in as an
Administrator to use this function.
Configuring System Settings on page 107
for more information.
Configuring PTZ Settings on page 57
Camera Settings on page 73).
Audio Settings on page
Audio Settings on page
133, for more information on changing the location.
for more
for more
for more information
54).
54).
File Location Settings on