White Balance; Figure 5-12 White Balance And Auto Focus Programming; Table 5-2 White Balance Modes - Honeywell HDZ20HD User Manual

White Balance

Setting up white balance options can compensate for temperature differences with different light
sources (such as sunlight, fluorescent light, and so on), and effecting the hue of the color white
under different light sources. You can select one of the following white balance modes based
on your operating environment:
Mode
Auto
Indoor
Outdoor
ATW
One Push
Manual
Figure 5-12 White Balance and Auto Focus Programming
Table 5-2 White Balance Modes
Description
Suitable for environments with a color temperature range from approximately
2,700K to 7,500K (wide range of light sources).
Suitable for indoor environments with a color temperature range from
approximately 2,500K to 3,000K (artificial light sources).
Suitable for outdoor environments with a color temperature range from
approximately 6,000K to 8,000K (natural light sources).
Suitable for environments with a color temperature range from approximately
2,500K to 10,000K (wide range of light sources).
Press the Trigger button to fix the current white balance value (of the current
video image). The white balance algorithm does not keep working after the
Trigger button is pushed.
Note This option not supported by HDZ30(X) and HDZ36E(X) models.
R (red) and B (blue) gain values are set manually by the user.
Configuring PTZ Settings | 77
800-11873V4 - A - 07/2014