Setting A Periodical Event File Name; Saving The Periodical Event Settings - Honeywell HDZ20HD User Manual

Setting a Periodical Event File Name

You can specify a file name format for images uploaded for the periodical event. Choose the
format that best meets your requirements.
1.
2.

Saving the Periodical Event Settings

After you have configured the periodical event settings, click Save. Make sure to click Save
before navigating to a different tab or option.
Save after you have configured all the periodical event settings. See
and the Interval, page
a Periodical Event File Name on page 105
Note After making changes to your settings, it is advised to click Save and save your
settings. This can be done at any time, or multiple times during setup.
In the File Name field (see
name).
Select one of the following options for the file name format:
• Add date/time suffix to add the date and time in YYMMDD_HHMMSS format (for
example, image130428_034724.jpg).
• Add sequence number suffix (no maximum value).
• Add sequence number suffix up to [number] and then start over, and enter a
value in the number field.
• Overwrite to overwrite an older file with a new file with a static filename.
103, Setting the Periodical Event Triggered Actions, page
Figure 6-17), type a file name (image.jpg is the default file
for more information.
Configuring Alarms | 105
Setting Up Periodical Event
104, and Setting
800-11873V4 - A - 07/2014