Dual Scope Screen; Mini Scope Screen - Icom iC-7850 Instruction Manual

Previous view Previous view
6
SCOPE OPERATION
Spectrum scope screen (Continued)
■
D Dual scope screen
This transceiver has a Dual scope mode that simul-
taneously displays the Main and Sub scopes during
Dualwatch operation.
You can select the "Over/Under" or "Side by Side" lay-
out in the Scope set screen.
 The Multi-function screens are OFF:
Push [SCOPE](F).
q
• The Spectrum scope screen is displayed.
Hold down [M/S DUAL](F) for 1 second.
w
• The Dual scope is displayed.
• Hold down [M/S DUAL](F) for 1 second to toggle be-
tween the Dual and Single scopes.
Push [M/S DUAL](F).
e
• Push [M/S DUAL](F) toggles between the Main and Sub
scopes.
• An orange frame moves and displays the selected side.
r To exit the Spectrum scope screen, push [EXIT/SET].
D Mini scope screen
The Mini scope screen can be simultaneously dis-
played with another Multi-function displays, such as
Set mode menu, RTTY/PSK decode screen, Memory
list screen.
Push [M.SCOPE] to turn the Mini scope screen ON
➥
or OFF.
• Hold down [M.SCOPE] for 1 second to display the Spec-
trum scope screen.
• When the Mini scope screen is displayed with the Scope
set screen, you can select the setting by verifying the
spectrum.
However, you cannot make changes using the Function
keys, such as the Scope attenuator setting, Center/Fixed
mode selection.
• Dual scope screen (OVER/Under: Fixed mode)
• Dual scope screen (Side by Side: Center mode)
• Mini scope screen with the Set mode menu screen
• Dual mini scope screen with the RTTY decode screen
6-6