Icom iC-7850 Instruction Manual page 231

Previous view Previous view
■ Others set mode (continued)
Network User1/2/3 ID
When you remotely control the IC-7850 using the optional
RS-BA1, enter a user name of up to 16 characters.
Usable characters:
Characters (a–z, A–Z, 0–9) and symbols (! # $ %& ? " ' ` ^
+ －
/ . , : ; = < > ( ) [ ] { } | _ ~@)
✱
• Push [EDIT](F) to enter the edit mode.
• Push [ABC] or [abc] to toggle the character type
between upper case and lower case letters.
• Push [123] or [Symbol] to toggle the character type
between numbers and symbols.
• Rotate [MAIN DIAL] to select a character.
• Push [Ω](F) to move the cursor to the left, push [≈](F) to
move the cursor right.
• Push [DEL](F) to delete the selected character.
• Push [EXIT/SET] to cancel and exit the edit mode.
• Push [SET](F) to save.
Network User1/2/3 Password
Enter a password for each user.
Usable characters:
Characters (a–z, A–Z, 0–9) and symbols (! # $ %& ? " ' ` ^
+ －
/ . , : ; = < > ( ) [ ] { } | _ ~@)
✱
• Push [EDIT](F) to enter the edit mode.
• Push [ABC] or [abc] to toggle the character type
between upper case and lower case letters.
• Push [123] or [Symbol] to toggle the character type
between numbers and symbols.
• Rotate [MAIN DIAL] to select a character.
• Push [Ω](F) to move the cursor to the left, push [≈](F) to
move the cursor right.
• Push [DEL](F) to delete the selected character.
• Push [EXIT/SET] to cancel and exit the edit mode.
• Push [SET](F) to save.
The entered password is masked by "*."
Network User1/2/3 Administrator
Sets the user as the administrator.
O n l y t h e a u t h o r i z e d u s e r c a n d i s c o n n e c t t h e
communication between the IC-7850 and the remote
station.
• NO: Not authorized.
• YES: Authorized.
Network Radio Name
When you remotely control the IC-7850 using the optional
RS-BA1 software, enter a name of up to 15 characters.
Usable characters:
Characters (a–z, A–Z, 0–9) and symbols (! # $ %& ? " ' ` ^
+ －
/ . , : ; = < > ( ) [ ] { } | _ ~@)
✱
• Push [EDIT](F) to enter the edit mode.
• Push [ABC] or [abc] to toggle the character type
between upper case and lower case letters.
• Push [123] or [Symbol] to toggle the character type
between numbers and symbols.
• Rotate [MAIN DIAL] to select a character.
• Push [Ω](F) to move the cursor to the left, push [≈](F) to
move the cursor right.
• Push [DEL](F) to delete the selected character.
• Push [EXIT/SET] to cancel and exit the edit mode.
• Push [SET](F) to save.
(Default: NO)
15-21
15
SET MODE
(Default: IC-7850)