Network Settings - Icom iC-7850 Instruction Manual

Previous view Previous view
SD/USB-MEMORY SET screen (Continued)
■
D LOAD SET screen
Load Contents
Select the contents to be loaded from the SD card or
USB flash drive to the transceiver.
• All: All memories and settings of the file are load-
ed into the transceiver.
• Select: The specified memories and settings of the
file are loaded into the transceiver, according
to the settings on the LOAD SET screen.
Antenna Memory
Select whether or not to load the antenna memory.
• YES: Loads
• NO: Does not load
REF IN/OUT, REF Adjust, Filter CAL
Select whether or not to load the REF signal IN/OUT
settings, REF adjustment values, and roofing filter cali-
bration adjustment values.
• YES: Loads
• NO: Does not load

Network Settings

Select whether or not to load the network settings.
• YES: Loads
• NO: Does not load
CI-V Address
Select whether or not to load the CI-V address set-
tings.
• YES: Loads
• NO: Does not load
USING AN SD CARD OR USB FLASH DRIVE
Other Memory & Settings
(Default: Select)
Select to load the Memory channel content and the
settings of the Other Set screen.
• YES:
Voice TX Memory
Select whether or not to load the Voice TX memory
content.
• YES:
(Default: NO)
• NO:
Voice RX Memory
Select whether or not to load the Voice RX memory
content.
• YES:
• NO:
(Default: NO)
(Default: NO)
(Default: NO)
10-9
Loads
Loads
Does not load
Loads
Does not load
10
(Default: YES)
(Default: YES)
(Default: YES)