Power Button Mode [On/Off]; Restore On Ac Power Loss [Last State]; Resume On Ring [Disabled] - IEI Technology ECK-3692 User Manual

ECK-3692G Embedded System
ATX power

Power Button Mode [On/Off]

The Power Button Mode BIOS specifies how the power button functions.
On/Off D
Suspend

Restore on AC Power Loss [Last State]

Use the Restore on AC Power Loss BIOS option to specify what state the system
returns to if there is a sudden loss of power to the system.
Power Off
Power On
Last State

Resume on Ring [Disabled]

The Resume on Ring BIOS option specifies if the system will be roused from a
suspended or standby state when there is activity on the RI (ring in) modem line. That is,
the system will be roused by an incoming call on a modem.
Disabled
Enabled
An ATX power supply is connected to the system
D
EFAULT
When the power button is pressed the system is either
EFAULT
turned on or off
When the power button is pressed the system goes into
suspend mode
The system remains turned off
The system turns on
The system returns to its previous state. If it was on, it
D
EFAULT
turns itself on. If it was off, it remains off.
Wake event not generated by an incoming call
D
EFAULT
Wake event generated by an incoming call
Page 63