Video - Panasonic aj-spd850p Operating Instructions Manual

Setup menus (continued)
USER menu <TIME CODE>
No./Item
510 This is used to switch the phase of
the time code, which is output from
TC OUT REF the TIME CODE OUT connector, for
the external LTC input when the TCG
switch is at the "EXT" position.
0000 V OUT :
Time code is synchronized with output
video signal.
0001 TC_IN :
Time code is synchronized with
external time code input.
511 This selects how the VITC which is to
be superimposed onto the output
VITC OUT video signal is to be output.
0000 SBC :
During playback:
The time code recorded in the SBC
area is output as the VITC.
0001 VAUX :
During playback:
The time code recorded in the
VAUX area is output as the VITC.
514 This selects whether or not to record
the internal time code generator value
VITC GEN in the VAUX area.
0000 OFF :
The internal time code generator
value is not recorded in the VAUX
area.
When video signals on which the time
code has been recorded are input, the
time code of the input signals is
recorded in the VAUX area.
0001 ON :
The internal time code generator
value is recorded in the VAUX area.
Note:
If 1394 has been selected as the input
signals, the time code on the input
compressed signals will be recorded
regardless of this menu's setting.
The underlined items indicates the initial setting.
Description
– 47 –
USER menu <VIDEO>
No./Item
600 This selects the internal signal.
INT SG 0001
The black burst is generated.
0002 CB100 :
100% color bars are generated.
0003 CB75 :
75% color bars are generated.
601 This selects whether to float the
vertical sync position of the video
OUT VSYNC output in order to align the video
output phase with the input in the
EE/record/edit modes.
0000 N-VF : Signals are not floated.
0001
603 This selects ON or OFF for the closed
caption signal of the first field.
CC (F1)
BLANK 0000 BLANK :
Signal is forcibly blanked.
0001 THRU : Signal is not blanked.
Note:
This menu option is not displayed in the
625i system.
604 This selects ON or OFF for the closed
caption signal of the second field.
CC (F2)
BLANK 0000 BLANK :
Signal is forcibly blanked.
0001 THRU : Signal is not blanked.
Note:
This menu option is not displayed in the
625i system.
605 This selects the freeze mode for still
pictures.
FREEZE SEL
0000 FIELD : Field freeze.
0001 FRAME : Frame freeze.
Note:
When frame freeze has been selected,
the frame slow status is established with
the slow setting.
606 This selects chroma color killer
processing for the video output
OUT C KILL signals.
0000
No color signals are output.
0001 COLOR :
Color signals are output.
Description
BB :
VF : Signals are floated.
B/W :