Chapter 21: User Authentication Commands; User Account Commands; Table 21-1 Authentication Commands; Table 21-2 User Access Commands - Edge-Core ES3528-WDM Management Manual

Chapter 21: User Authentication Commands

You can configure this switch to authenticate users logging into the system for
management access using local or remote authentication methods. Port-based
authentication using IEEE 802.1X can also be configured to control either
management access to the uplink ports or client access
Command Group
User Accounts
Authentication Sequence
RADIUS Client
TACACS+ Client
Web Server Settings
Telnet Server Settings
Secure Shell Settings
Port Authentication
IP Filter

User Account Commands

The basic commands required for management access are listed in this section.
This switch also includes other options for password checking via the console or a
Telnet connection (page 19-19), user authentication via a remote authentication
server (page 21-1), and host access authentication for specific ports (page 21-24).
Command
username
enable password
32. For other methods of controlling client access, see "Client Security Commands" on page
22-1.

Table 21-1 Authentication Commands

Function
Configures the basic user names and passwords for management
access
Defines logon authentication method and precedence
Configures settings for authentication via a RADIUS server
Configures settings for authentication via a TACACS+ server
Enables management access via a web browser
Enables management access via Telnet
Provides secure replacement for Telnet
Configures host authentication on specific ports using 802.1X
Configures IP addresses that are allowed management access

Table 21-2 User Access Commands

Function
Establishes a user name-based authentication system at login
Sets a password to control access to the Privileged Exec level
32
to the data ports.
Mode
GC
GC
Page
21-1
21-4
21-6
21-9
21-11
21-14
21-15
21-24
21-33
Page
21-2
21-3
21-1