Yamaha SR125 1997 Service Manual page 93

CAM SHAFT AND ROCKER ARMS
4-13
2. Apply:
: Molybdenum disulfide oil
(onto the rocker arm and rocker arm shaft)
Molybdenum disulfide oil
3. Install:
: Rocker arm
: Rocker arm shaft 1
NOTE:
: Apply engine oil onto the outside of the rocker
arm shaft and apply molybdenum disulfide oil
onto the inside of the rocker arm.
: Install the rocker arm shaft (intake), mach the
cut away a and bolt hole b .
CAUTION:
: Make sure that the rocker shaft install
direction.
: Install the rocker arm shaft into the thread
side for the out.
4. Install:
: Camshaft 1
: Collar 2
NOTE:
: Apply engine oil onto the cam profile face and
journal face.
: Install the camshaft, mach the dowel pin a
and cylinder head mark b .
5. Install:
: Plate 1
: Lock washer 2
New
: Bolt 3
NOTE:
After tighten the bolt, bend the end of the rock
washer.
ENG
8 Nm (0.8 m:kg)