Front Fork Assembly - Yamaha SR125 1997 Service Manual

FRONT FORK
2. Measure:
: Fork spring a
Front fork spring free length:
326.1 mm
<Wear limit>
321 mm
Over the specified limit ! Replace.
3. Inspect:
: Rod assembly 1
Bends/damage ! Replace.
CAUTION:
: The front fork has a built-in piston rod and
a very sophisticated internal construction
which are particularly sensitive to foreign
material.
: When disassembling and assembling the
front fork do not allow any foreign material
to enter the oil.
SR******

FRONT FORK ASSEMBLY

Reverse the "DISASSEMBLY" procedure.
Note the following points.
NOTE:
: When assembling the front fork be sure to re-
place the following parts.
* Piston metal
* Slide metal
* Oil seal
* Dust seal
: Before assembling the fork, make sure that all
of the components are clean.
1. Install:
: Damper rod 1
: Inner tube 2
NOTE:
Install the damper rod into the inner tube before
install to the outer tube.
6-32
CHAS