Yamaha SR125 1997 Service Manual page 183

FRONT FORK
2. Install:
: Piston metal 1
: Oil seal 2
New
Use the fork seal driver weight 3 and the at-
tachment 4 .
NOTE:
Before installing the oil seal 2 , apply lithium
soap base grease onto the oil seal lips.
CAUTION:
Make sure that the oil seal numbered side
faces upward.
Fork seal driver weight:
90890-01400
Attachment:
90890-01367
3. Install:
: Washer (oil seal) 1
: Retaining clip 2
: Dust seal 3
NOTE:
Adjust the retaining clip so that it fits into the out-
er tube groove.
4. Inspect:
: Inner tube operation
Unsmooth operation ! Disassembly and re-
check.
5. Fill:
: Fork oil 1
Oil quantity:
0.177 L
Recommended oil:
Fork oil 15WT or equivalent
6. After filling up, slowly pump the fork up and
down to distribute the fork oil.
6-33
CHAS
New
New