Sift Shaft Installation - Yamaha SR125 1997 Service Manual

SHIFT SHAFT AND SEGMENT
2. Install:
: Segment 1
NOTE:
Fit the dowel pin 2 (long length) on the seg-
ment to the locating hole a on the sift cam and
install the segment.
3. Tighten:
: Screw 1
SR******

SIFT SHAFT INSTALLATION

1. Install:
: Shift shaft assembly
***************************************
Instaling steps:
: Set the stopper lever and return spring to the
shift shaft.
: Mesh the stopper lever 1 with the shift cam
segment.
: Install the shift lever 2 to the shift cam seg-
ment.
: After installing the shift shaft, check the shift
cam for smooth operation by turning the shift
shaft with your hand.
***************************************
2. Check:
: Shift lever 1 position
4-43
Gaps a and b are not equal ! Replace the
defective parts.
ENG
12 Nm (1.2 m:kg)